12' batwing, 4 x 21" laminated tires, chain guards, Land Pride performance hitch, orange
Information
2023 Land Pride RC3712 Series RC3712
Land Pride's RC3712 (RCM3712) Folding Rotary Cutter features a 3" cutting capacity with a cut height of 1.5" to 14". The input driveline is a constant-velocity, Cat. 6 with Cat. 4 wing drivelines. The cutter is available for 540 or 1000 RPM tractors, with 4 or 6 tires in 3 sizes, and 5 hitch options. Standard equipment include wing transport locks, transportation lights, and replaceable skid shoes. Also available as an RCG3712 model that offers a hot-dipped zinc galvanized deck.
Features may include:
GEARBOX WARRANTY
5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
3" CUTTING CAPACITY
These cutters offers 3" cutting capacity. See Operator's Manual for more information.
ADJUSTABLE JACK ANGLE
Helps keep park jack vertical when in use.
LED SIGNAL LIGHTS
LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.
BEVELED SKID SHOES
Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.
3/16" STUMP JUMPER
Standard 3/16" thick stump jumper material keeps damage to a minimum.
GREASEABLE HINGED WING SECTIONS
Greaseable hinged wing sections have 1" solid hinge rods and allow the cutter to follow rough ground, alleviating uneven cutting.
BEVELED SKID SHOES
Beveled skid shoes on wings reduces gouging of the ground when turning.
LOW HITCH WEIGHT
Low hitch weight on tractor drawbar is ideal for smaller horsepower tractors. Narrow A-frame hitch allows for tighter turns.
Photos
Highlights
Jackson
New
6061
2023
Land Pride
RC3712 Series RC3712
Available
Cutting: 1-1/2" - 14"
2203968
Specifications
2023
Land Pride
RC3712 Series
RC3712
Rotary Cutters
50-160 HP
Input: Cat. 6 CV | Connecting: Cat. 4 Slip Clutch
Rating: 160 HP Divider / 130 HP Center & Wings | 540 RPM or 1000 RPM | Input Shaft: 1-3/4" 20 Spline / Output - 2"
Spring Cushioned Center Axle
21" or 26" Laminated, 25.5" Aircraft, or 24" Foam-Filled
Blade tip speed: 540 Center Blades - 15,514 FPM / Wing Blades - 15,474 FPM-15,707 FPM / 1000 Center Blades - 15,700 FPM
10 Gauge
Pull-Type; Standard Swivel Clevis, LP Performance Self-Leveling, Ball, Pintle, or Bar-Tite Hitch
Hydraulics Center: 3" x 8" | Hydraulics Wings: 2-1/2" x 12" | Side Panel Thickness: 1/4" | Cutting capacity: 3" Diameter | Blade overlap: 6" | Dishpan: 10 Gauge Round, Dish Shaped w/ 1" x 4-1/2" Blade Bar | Max. Turning Angle: 80° with CV | Blades: 1/2" x 4" Uplift
11"
Cutting: 1-1/2" - 14"
12'10"
15'3"
Minimum: 9'4"
12' (366 cm)
Tongue: 1,240 lb | Machine: 3,730 lbs (6,192 kg)
Skid shoes: Wings & Center, Replaceable, Beveled | Blade bolt: Keyed with Hardened Flatwasher & Lock Nut | Chain Guards Front & Rear: Single chain