2020 New Holland Discbine® 310/312 Center-Pivot Disc 310 (Chevron Rubber)

2020 New Holland Discbine® 310/312 Center-Pivot Disc 310 (Chevron Rubber)

PRODUCTIVE, VERSATILE AND MANEUVERABLE

Center-pivot Discbine® 310 and 312 disc mower-conditioners mow cleanly and maneuver quickly to speed up your hay and forage making. They offer productive 10’ 4’’ and 11’ 6’’ cutting widths, simple maintenance and a modest 80- and 87-PTO-horsepower requirement that makes them easy to own.

The productive center-pivot design lets you lay down long continuous swaths that save time throughout the haymaking process. By alternating from left to right on each pass, you improve your efficiency from cutting and through baling or harvesting. The Discbine 310 and 312 are at home in large fields as well as small or oddly shaped ones. The standard swivel gearbox hitch allows turns greater than 90° while the PTO angle remains virtually unchanged to practically eliminate driveline chatter and wear through the tightest turns. Transport width is no wider than the cutting width for easy movement between farm and field.

You cut every bit of crop when you choose a Discbine® 310 or 312 disc mower-conditioner. The new low-profile disc cutterbar gets all the crop and leaves clean, good-looking mown fields. Shallow working angle also means crop flows smoothly over the cutterbar into the conditioner for even conditioning. The high-capacity counter-rotating discs move crop rearward, out of the knife path and into the conditioner.

Whether you’re mowing alfalfa, clover, orchard grass, timothy, bermuda grass, bahia, grass, fescue, cereal rye, forage wheat or oats, a Discbine 310 or 312 mower-conditioners make quick work of mowing and preparing your crop for baling or chopping.

You’ll produce nutritious, high-value feed with your choice of two conditioning systems—the gentle conditioning of rubber chevron-intermeshing rolls that save delicate leaves, or the Y-tine flail system for fast drying of grass hay. Both conditioning systems cover 85% of the working width for high capacity, and produce well-formed, fast-drying windrows and wide swaths.

All Discbine models feature fast and easy windrow shield and swath gate adjustments, without tools, so you can quickly adjust to crop and moisture conditions and your harvesting method. Spread the cut crop in a fast-drying swath or into a tight, three-foot-wide windrow that’s ready to bale or chop.

Features may include:

The new low-profile disc cutterbar cuts low and clean, resulting in uniform stubble height, even in light grasses, or tough and tangled crops.

Mow right or left or any way you like with the productive, center-pivot design.

You get the big productivity of 10’ 4’’ and 11’ 6’’ cutting widths with a mere 80 or 87 PTO horsepower.

Choose the best conditioning system for your crops – chevron rubbers rolls or the all-new Y-tine flail system.

You cut every bit of crop with a disc cutterbar that mows at a shallow angle, slicing cleanly through the lightest grass or toughest down and tangled crops, and producing uniform stubble height for clean, good-looking mown fields. The high-capacity counter-rotating discs move crop rearward, out of the knife path and into the conditioner.