Back

2022 Schulte FX-1800 Rotary Cutter

15' heavy duty rotary cutter, 1000 PTO, pro level hitch, front and rear chain guards, roll formed stump jumper, standard axle on center and wings, independent wing lift, heavy duty 24x8-14 foam filled tires
MoreLess
Limited Time Offer!

Selling Price -
Click for a Quote

No Images Available

Selling Price -

Click for a Quote

HD Certified Pre-Owned

2022 Schulte FX-1800 Rotary Cutter

Features may include:
  • Our medium duty 15' flex wing, rotary cutter
  • A single domed 7 ga continuously welded deck makes this rotary cutter extremely easy to clean, prevents water pooling and rusting and helps shed debris.
  • 6.5 ” blade overlap and high blade tip speeds.
  • A four gearbox drive line with independent slip clutches. The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260 HP (194kw). The centre and wing boxes have 1 3/4 ” 20 spine input shafts, 2 3/8 ” down shafts and are rated at 225 HP (168kw)*.
  • An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service.
  • Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
  • Available in 540 or 1000rpm drive.
  • 2022
  • Schulte
  • FX-1800 Rotary Cutter
  • Base
  • General
  • Minimum: 50 HP (37kW) | Recommended: 85 HP (63kW)
  • 540 or 1000rpm
  • Center & Wing Gearbox Rating: 225 HP (168kw) | Drive Size, Centre and Wings: Category 6
  • Drive Size, Main: Cat.5CV (1000rpm),Cat.6 CV (540 rpm)
  • Rubber gromett 3 puck system
  • Laminate, Aircraft (5 bolt) 22” size
  • Blade tip: 540 rpm / 1000 rpm | Center: 15980 ft/min (4871m/min) / 15974 ft/min (4869m/min) | Wing: 15459 ft/min (4711m/min) / 15708 ft/min (4788m/min)
  • 7GA (3/16",4.6mm)
  • Cutting capacity: 4"(101.6mm) | Blade overlap: 6.5"(165.1mm) | Output Shaft: 2.38"(60.3mm) | Wing Working Range: 25 o down to 87 o up | Wing Floating Range: 25 o down to 30 o up
  • 180 ” (4.57m)
  • 190 ” (4.83m)
  • 202 ” (5.13m)
  • 93” (2.36m) (Singles on wings) 102" (2.59m) (Duals on wings)
  • 84"(2.13m)
  • Cutting: 1.75"to 16.75" (44.5mm to 425mm)
  • 14.75"(42.5mm)
  • Side Skirt Depth & Thickness: 13.63" (346mm) & 1/4” (6.35mm)
  • 5,600 lbs (2540kg) | Hitch: 1680 lbs (762kg)
  • C18522733404
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Perryville
  • Pre-Owned
  • 35486
  • 2022
  • Schulte
  • FX-1800 Rotary Cutter
  • Available
  • Cutting: 1.75"to 16.75" (44.5mm to 425mm)
  • C18522733404

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.